Providing Cells and Custom User Interfaces for Micrtostation J and v8 Users
Choose A Library   2D HVAC Library
2D CAD Library
2D Architectural Library
2D PID Library
2D Piping Library
2D Civil Library
2D Structural Library
2D Electrical Library
2D Annotation Library
3D CAD Library
3D Architectural Library
3D Piping Library
3D HVAC Library
3D Electrical Library


Quickly insert the symbols you need...
With a couple clicks of the mouse, you'll be able to quickly insert the symbols you need to create HVAC Duct drawings with ease. By utilizing a custom user interface and dialog boxes, this cell library organizes all of the symbols for easy and instant access.

It's easy to use...
The HVAC-Library can be easily loaded into MicroStation's menu bar for quick access.  Full instructions are included. Just point and click to choose the symbol you need...there's nothing to type!

Once you click on the group of symbols you need, a dialog box will pop up showing all of the symbols contained in that group. Just double click on the symbol you would like to use and then insert it into your drawing. It's that simple!

No learning curve - you'll be productive in seconds!
And with a money back guarantee you have nothing to lose!


All selections are made from pull down menus. And to guarantee that all cells are inserted to scale, the menu bar will automatically set your active scale to 1 (AS=1) and your active angle to zero (AA=0). Just be sure the "true scale" option is clicked on in the Microstation "place cell dialog box" (v8 only).

Here's what you get ...
Now let's take a look at what is included with this library:
  Hundreds of Duct Fittings:
Elbows (mitered,square-throat,gored, with and without vanes) Tees, Caps, Cross, Laterals, Transitions, Reducers, Y-Branches and more.

Round sizes 3" thru 12". Click here to view all the 6" fittings.

Rectangular sizes 3" thru 36". Click here to view all  the 12" fittings.

Note: All dimensions taken from McGill duct manufacturing catalogs. Centerlines are not included with the cells because they are usually on a separate level and color. However, the origin point of each fitting is at the intersection of any two centerlines that you lay out.
This set contains square diffusers from 6"x6" to 48"x48" (2-way, 3-way, and 4-way) in plan view.
This set contains louvers from 12" to 48" in plan and elevation views.
Click hereto view all the cells in plan view. Click here to view all the cells in elevation view.
This set contains registers from6"x.." to 48"x.."in plan and elevation views.
To view the 6" diffusers and registers Click here.

Top of Page  

Go to:

2D CAD Libraries:
Architectural | P&ID | Piping | Civil | Structural | Electrical | HVAC | Annotation

3D CAD Libraries:
Architectural | Piping | HVAC | Electrical

This site is © Copyright 2016. All rights reserved.