|
These comprehensive 2D cell libraries
contain over 6,000 common pipe symbols and an easy to use custom user
interface to produce process piping layouts.
No learning curve - you'll be
productive in seconds!
Just point and click to the fitting you
need. And with our money back
guarantee you have nothing to lose!
This library includes:
Double-line pipe fittings in Forged
Steel (threaded), Carbon/Stainless Steel (butt-weld) , Ductile
Iron-flanged, Ductile Iron-mechanical joint, Polyvinylchloride (PVC),
Polypropyline (PP),
ABS-Drain Water Vent, and HDPE (mitered, socket and butt-weld).
Single-line (no scale) pipe fittings for
diagrammatic (2 1/2" & under) piping layouts, and isometric symbols
for schematic piping
drawings.
Manual valves (ball, gate, plug, globe,
angle, check, knife, butterfly)
Expansion joints, Flow meters, Hose
connections, Nozzles, Instrument taps,
and you also get the Annotation
Library FREE.
Screen
shot of custom menu:
The workflow of the interface
is layed out in a logical manor and made to be very user friendly. All
cell libraries
have been broken down to contain only a few (or more) cells in each
library.
You won't have to scroll thru hundreds of cells looking for the one you
need.
This library can be easily loaded
into MicroStation's
menu bar for quick access. Full instructions are included. Once
loaded,
"Piping-Library" will appear in the menu bar. Just point and click to
choose
from a wide range of pipe fittings. All selections are made from pull
down
menus. And to guarantee that all fittings are inserted to scale, the
menu
bar will automatically set your active scale to 1 (AS=1) and your
active
angle to zero (AA=0).
What types of pipe fittings
are in
the library?
Many different material categories are
represented. All fittings are drawn double-line except where noted.
Here's what you get:
|
•
|
|
Forged
Steel fittings (threaded) (3,000# and 6,000#) - sizes 1/8" through 4"
ASME B16.11
This set contains 90 degree elbows, 45 degree elbows, tees, crosses,
laterals, couplings, caps, and unions and more. Click
here to view the 2" fittings. |
| |
|
|
|
•
|
|
Ductile
Iron Flanged fittings - sizes 4" through 48"
ANSI/AWWA C110/A21.10 and
C153/A21.53
This set contains 90 degree elbows, 45 degree elbows, tees, reducing
tees, crosses, laterals, reducing laterals, eccentric reducers &
concentric reducers and more. Click
here to view the 10" fittings. |
| |
|
|
|
•
|
|
Ductile
Iron Mechanical Joint fittings - sizes 4" through 48"
ANSI/AWWA C110/A21.10 and
C153/A21.53
This set contains 90 degree elbows, 45 degree elbows, tees, reducing
tees, crosses, laterals, reducing laterals, eccentric reducers &
concentric reducers and more. Click
here to view the 12" fittings. |
| |
|
|
|
•
|
|
Carbon/Stainless
Steel - Buttweld fittings - sizes 1/2" through 48"
ASME B16.9 - for fittings, ASME
B16.5 & ASME B16.47 for flanges
This set contains 90 degree elbows, 45 degree elbows, tees, reducing
tees, 150lb.thru 900lb. flanges, pipe caps, eccentric/concentric
reducers and more. Click
here to view the 6" fittings. |
| |
|
|
|
•
|
|
PVC
fittings - socketweld - sizes 1/2" through 8"
ASTM-D1785 schedule 80
This set contains 90 degree
elbows, 45 degree elbows, tees, reducers, flanges, reducing bushings,
unions and more. Click
here to view the 6" fittings. |
| |
|
|
|
•
|
|
Polypropyline
Fittings - sizes 2" through 12"
PN10/SR150
This set contains 90 degree elbows, 45 degree elbows, tees, flanges,
reducers and pipe caps and more. Click
here to view the 6" fittings. |
| |
|
|
|
•
|
|
ABS-DWV
Fittings - sizes 1 1/2" through 6"
ASTM-F 628 schedule 40 DWV pipe
90 degree elbows, 45 degree elbows, sanitary tees, wye's, p-trap,
closet flange, return bends and more.
Click
here to view the 4" fittings. |
|
|
|
|
• |
|
Single line fittings:
(For diagrammatic (2 1/2" &
under) piping layouts and schematic piping drawings.)
Socketweld -Click
here to view the fittings.
Buttweld - Click
here to view the fittings.
Threaded - Click
here to view the fittings.
Isometric symbols - Click
here to view the fittings/symbols. |
|
|
|
|
|
HDPE Fittings - sizes 1/2" through 54"
ASTM-D 2513, D 3261, and D 2683
Socket weld, Butt weld, and Mitered fittings:
Elbows,tees, laterals, caps, cross, lap joint flange,
swage reducers and more.
|
What types of valves are in the
library?
A wide variety of valves in carbon steel,
304L stainless steel, bronze, cast iron, ductile iron, and PVC with
flanged, socket weld, buttweld and threaded ends.
Valves are drawn in side, top, and end view
and include manual handles to aid you in placing them where clearance
may be an
issue. All flanged valves have face of flange to face of flange
dimensions according to ANSI standard B36.10. (Except Cameron valves).
The dimensions used to create these
valves were taken from catalogs of these manufacturers: Crane,
Asahi/America, Nibco, Apollo, Watts, George Fischer, Bray, Centerline,
Tufline,Cameron and Dezirek.
Angle valves
classes 125, 300 & 600
sizes 1/2" to 12" |
Ball valves
classes 125,150,300,
600 & 900
sizes 1/2" to 48"
150psi for PVC |
Butterfly
valves
class 150 sizes 1" to 36" 150psi
for PVC |
| |
|
|
Check valves
classes 125, 150, 300 & 600
150psi for PVC
sizes 1/2" to 24" |
Diaphragm
valves
150psi PVC only
sizes 1/2" to 10" |
Gate valves
classes 125, 150, 300,
600 & 900
sizes 1/2" to 30"
150psi for PVC |
| |
|
|
Globe valves
classes 125, 150, 300,
600 & 900
150psi for PVC
sizes 1/2" to 14" |
Plug valves
classes 150 & 300
sizes 1/2" to 20" |
Knife valves
classes 150 & 300
sizes 2" to 48" |
| |
|
|
| Click here to view all the
3" valves. |
Here are the rest of the symbols in
the library:
|
•
|
|
Expansion
joints
sizes 1" to 36"
1, 2, & 3 arch
Manufacturer - RedFlex. Click
here to view the 6" expansion joints. |
| |
|
|
|
•
|
|
Dresser
Couplings
sizes 1/2" to 36"
For steel and cast iron pipe. Manufacturer - Dresser (shown under
carbon steel and ductile iron) |
| |
|
|
|
•
|
|
Flow meters
sizes 1/2" to 12"
Manufacturers - Krohne, Foxboro & Flow Technology, Inc. Click
here to view the 6" flow meters. |
| |
|
|
|
•
|
|
Strainers
carbon steel: sizes 1/2" to 6"
cast iron: sizes 1/2" to 10"
Manufacturer - Armstrong (shown under carbon steel and ductile iron) |
| |
|
|
|
•
|
|
Hose
connections
sizes 1/2" to 4"
With flanged and coupling ends. Click
here to view the 4" hoses. |
| |
|
|
|
•
|
|
Nozzles
sizes 1/2" to 48"
6",9", and 12" lengths
(shown under carbon steel) |
| |
|
|
|
•
|
|
Instrument
taps
Pressure indicators, sample taps,
flush connections. Click
here to view the instrument taps. |
System requirements...
PC compatible with Microstation
J or v8.
6 megabytes of available disc space.
The "Piping-Library"
with an easy-to-use point & click menu
system can be yours for the low price of only
Single user
license: $199.00
2 - 13 user license: $179.00 (each)
Unlimited user license: $2,500.00
The number of licenses you
need is based on how many cad operators will be using the cell library
at the same
time. For example, if there are 10 cad operators in a department and 3
of
them will be using the library at the same time, then 3 licenses need
to
be purchased. In this case, the cell library can be installed on 3
separate computers or on a network server for
use by 3 cad operators only.
You'll be productive as soon as you
receive it.
And don't forget about the 30 day
money back guarantee.
Not sure if this is a good deal?
Well let's break it down ...
There are 6,080 2d pipe cells in this library. Let's say that a cad
operator, making $18 per hour, can look up the dimensions for each cell
and create one
every five minutes. That's twelve cells per hour. 6,080 cells divided
by
12 per hour equals 506 hours of work...nonstop! At $18 per hour, that
cad
operator would be paid $9,108! Of course, that price rises when you
factor in breaks and checking right? As you can see, this is a bargain.
And you'll be productive as soon as you receive it.
Skeptical?
Download the
demos!
Click here to
download a free version of the "Libraries"
It's a fully functional user interface that contains a small sample of
cells.
You'll need WinZip® to
open this file.
If you do not have WinZip®, you can download the free trial
version here.
Place your secure credit card
order here:
| Download it now : |
|
Upon completion of the ordering process, click on the
"Return to Merchant" button to download your order.
After downloading, open the zip file and double click on
the "ReadMeFirst.txt" file for loading instructions.
|
|
Single user license only: $199.00
|
|
|
| Upgrade for Microstation XM and v8i: |
|
Only $50.00
|
|
|
|
|
Purchase Order:
PO's are accepted only with company
letterhead by fax or mail.
All invoices are payable
within 30 days.
| |
|
| Mailing
Address: |
CadCells.com
941 Fairfield lane
McDonald, PA 15057
USA
|
To order with check or money
order:
Click here to mail your order via printable form
To order Individual cell libraries with check or
money order:
Click
here to mail your order via printable form
All CD orders are
shipped via Priority Mail in the U.S.
All orders outside the U.S. are shipped by Air Mail.
All shipping and handling charges are included in the price(s).
|
